PN 8080 - Single Circuit on / off - Plus Main
- Ignition protected - Safe for installation aboard gasoline powered boats
- Isolates the Engine circuit from the House circuit
- Simplifies battery switch operation
- Protects electronics from sags and spikes caused by engine cranking
- Discharges batteries independently
- Addition of an Automatic Charging Relay automates charging of both batteries
- Enables a failed Start battery to be isolated from the electrical system and both House and Start loads to be operated from the remaining battery bank
- Provides main circuit protection for DC House power system
- Enables a failed House or Start battery bank to be isolated from the electrical system and both House and Start loads to be operated from the remaining battery bank
- Simplifies battery switch operation
- Isolates Start circuit from House circuit
- Protects electronics from sags and spikes caused by engine cranking
- Ignition protected - Safe for installation aboard gasoline-powered boats
- Addition of an Automatic Charging Relay automates charging both batteries
- Allows independent battery discharge
Isolates batteries and provides DC main circuit protection.
Specifications
| Height in" (mm) | 6.50 (165.10) |
| House Circuit Protection | 100 Amperes DC |
| Inrush Rating: 0.25 sec (10 repeats)* | 1500 Amperes DC |
| Width in" (mm) | 5.25 (133.35) |
| Continuous Rating: (UL 1107) | 300 Amperes DC |
| Weight Lb (Kg) | 2.20 (1.00) |
| Maximum Voltage Rating | 48 Volts DC |
| Cranking Rating: 9.75 sec (10 repeats)* | 700 Amperes DC |
| Intermittent Rating: 5 min (UL 1107) | 500 Amperes DC |
| Terminal Stud Size | 3/8" -16 (M10) |
| Terminal Stud Torque | 140 in-lb |
| Cable Size to Meet Ratings | 4/0 AWG (95 mm²) |
| Cable Clearance For 4/0 AWG Cables | 1.12" (28.4mm) |
| Agency Standards | All components meet SAE J1171 external ignition protection requirements |
Lisätiedot
| Tuotekoodi | PN 8080 |
| Yksikkö | kpl |
| Tila | myynnissä |
| Toimituskulut | 9€ |
| Hinta | 221.00€ |